FOR IMMEDIATE RELEASE
-------------------------------------
New 330cc Big Bore Kit for the 2006 and 2007 Kawasaki KLX 250 S.
A Monster bolt on improvement for the KLX 250S.
Glenwood Springs Colorado – October 15, 2007 Kustom Kraft Performance Inc. has announced the release of their KLX 250S Big Bore Kit. It is a fairly simple bolt on cylinder kit. The kit increases the piston displacement by a whopping 30% over stock. That’s 80cc more displacement for increased power throughout the power range. Most owners of the KLX 250S would agree that the bike is in dire need of more power. If you want more power to lift the front wheel, roost out the corners, or climb the dunes then this is for you. Be sure to check out the test done by “Adventure Motorcycle /Dual Sports News”, link is at the end of this article.
The kit is supplied with a brand new 83mm cylinder, a high performance JE piston with rings, pin and clips, plus the cylinder head gasket and base gasket. Kits are made to order in about two weeks.
The price for the KLX 250S kit is $769.00 plus S&H
Hold-on want even more? How about 28+ horsepower (dyno tested), that’s 11+ horsepower, 70% more than stock? If you do KK recommends adding cams, pipe, carburetor, and cylinder head porting. Call toll free 888 697 4343 for prices.
What if you have a KLX300 and you want more fun too. Kustom Kraft Performance will do a 330cc kit for your KLX 300. This kit doesn’t require a new cylinder, just send your old cylinder (it doesn’t even have to be in working condition) and they will machine it to accept the 83mm bore and re-plate it like new. The kit is also supplied with a high performance JE piston with rings, pin and clips, plus the cylinder head gaskets and base gasket. Kits are made to order in about two weeks.
The price for the KLX 300 kit is $440.00 plus S&H
KK recommends for even more fun add the cams, pipe, carburetor, and cylinder head porting to the KLX 300.
Kustom Kraft Performance has been around for almost 40 years repairing, sleeving, plating cylinders and designing big bore kits.
To read the complete test of the KLX250 330 Big Bore Kit by Adventure Motorcycle/ Dual Sports News visit http://kustom-kraft.com/klx250bb.html
For more information about Kustom Kraft visit their website at http://kustom-kraft.com/ or call toll free 888-697-4343.
-------------------------------------
New 330cc Big Bore Kit for the 2006 and 2007 Kawasaki KLX 250 S.
A Monster bolt on improvement for the KLX 250S.
Glenwood Springs Colorado – October 15, 2007 Kustom Kraft Performance Inc. has announced the release of their KLX 250S Big Bore Kit. It is a fairly simple bolt on cylinder kit. The kit increases the piston displacement by a whopping 30% over stock. That’s 80cc more displacement for increased power throughout the power range. Most owners of the KLX 250S would agree that the bike is in dire need of more power. If you want more power to lift the front wheel, roost out the corners, or climb the dunes then this is for you. Be sure to check out the test done by “Adventure Motorcycle /Dual Sports News”, link is at the end of this article.
The kit is supplied with a brand new 83mm cylinder, a high performance JE piston with rings, pin and clips, plus the cylinder head gasket and base gasket. Kits are made to order in about two weeks.
The price for the KLX 250S kit is $769.00 plus S&H
Hold-on want even more? How about 28+ horsepower (dyno tested), that’s 11+ horsepower, 70% more than stock? If you do KK recommends adding cams, pipe, carburetor, and cylinder head porting. Call toll free 888 697 4343 for prices.
What if you have a KLX300 and you want more fun too. Kustom Kraft Performance will do a 330cc kit for your KLX 300. This kit doesn’t require a new cylinder, just send your old cylinder (it doesn’t even have to be in working condition) and they will machine it to accept the 83mm bore and re-plate it like new. The kit is also supplied with a high performance JE piston with rings, pin and clips, plus the cylinder head gaskets and base gasket. Kits are made to order in about two weeks.
The price for the KLX 300 kit is $440.00 plus S&H
KK recommends for even more fun add the cams, pipe, carburetor, and cylinder head porting to the KLX 300.
Kustom Kraft Performance has been around for almost 40 years repairing, sleeving, plating cylinders and designing big bore kits.
To read the complete test of the KLX250 330 Big Bore Kit by Adventure Motorcycle/ Dual Sports News visit http://kustom-kraft.com/klx250bb.html
For more information about Kustom Kraft visit their website at http://kustom-kraft.com/ or call toll free 888-697-4343.
No comments:
Post a Comment